Brake&Torno

 

 

 

 Diskbrake is a type of brake that uses calipers to squeeze pairs of pads against a disc in order to create friction that retards the rotation of a shaft, such as a vehicle axle, either to reduce its rotational speed or to hold it stationary. The energy of motion is converted into waste heat which must be dispersed. Hydraulic disc brakes are the most commonly used form of brake for motor vehicles but the principles of a disc brake are applicable to almost any rotating shaft.

Compared to drum brakes, disc brakes offer better stopping performance because the disc is more readily cooled. As a consequence discs are less prone to the brake fade caused when brake components overheat. Disc brakes also recover more quickly from immersion (wet brakes are less effective than dry ones).
Most drum brake designs have at least one leading shoe, which gives a servo-effect. By contrast, a disc brake has no self-servo effect and its braking force is always proportional to the pressure placed on the brake pad by the braking system via any brake servo, braking pedal, or lever. This tends to give the driver better "feel" and helps to avoid impending lockup. Drums are also prone to "bell mouthing" and trap worn lining material within the assembly, both causes of various braking problems

Brake Services

From drum brakes to disc brakes, calipers and rotors, to shoes and pads, the highly trained technicians at D.C.C® know your brake system and can perform brake inspections and brake pad replacements on almost every make and model. This includes models equipped with ABS, otherwise known as an Anti-Lock Braking System. So you can drive with confidence and Leave Worry Behind®.

Brake Inspection

It’s a good idea to have your brakes inspected every 12,000 miles or about once a year. A D.C.C® technician will conduct an inspection of the brake system’s linings and other key components and provide you with a written evaluation, including a detailed diagnosis of the findings. Service recommendations will be based on your vehicle manufacturer’s recommendations and the condition of the brake components that impact system performance. 

Brake Repair

If your brakes require service, you’ve come to the right place. We have a certified brake technician who performs or oversees every Brake Repair. They’ll make sure that your brakes are serviced in accordance with your vehicle manufacturer’s recommendations, including all replacement parts like pads, hardware and if necessary drums and/or rotors. 

Brake Fluid Exchange

Your D.C.Ccan tell you whether a brake fluid exchange is due for your vehicle, based on your vehicle manufacturer’s recommendations. If it is, the technician will remove the old fluid and replace it with new fluid that meets or exceeds your vehicle manufacturer’s recommendations. 

Please note: Not all Jiffy Lube® service centers offer all Brake Services. Please call ahead to ensure the service is available. Find Your D.C.C now

Signs or Symptoms Your Vehicle Needs Brake Services:

• #1It’s been over a year or 12,000 miles since the last time your brakes were inspected
• #2You’re near or past the number of miles your vehicle’s manufacturer recommends between brake fluid exchanges
• #3The brake warning light on your dashboard comes on and stays on
• #4You hear grinding or squealing when you apply the brakes
• #5Your vehicle pulls to one side when you apply the brakes
• #6Your vehicle requires longer distances to stop than it used to
• #7The brake pedal responds slowly and feels "spongy"
• #8The brake pedal goes to the floor and/or requires excess pressure

Find a D.C.C Location